For almost 30 years, Pool Cover has established an unrivalled quality standard.
Low swimming pool enclosure – CURVE
Discover the low swimming pool enclosure that POOL COVER offers you : the swimming pool enclosure CURVE
The sliding swimming pool enclosure CURVE is a low swimming pool enclosure. As its name suggests, it is rounded or basket handle shaped.
The telescopic swimming pool enclosure CURVE is a model that bring aesthetics and discretion. Its low height, it fits perfectly to your environment.
The opening and closing of the enclosure is very easy. Once folded, the swimming pool enclosure CURVE is limited to a congestion of only 2.4 meters.
The standard colours here are the smooth shades RAL7016 (dark gray) and RAL7042 (light gray). These colours increase the elegences of its curves.
The glazing is exclusively in honeycombed polycarbonate 8mm on the roof and full 2.5 mm on the sides and the side walls. At the bottom, each vertical side (at the ends of the enclosure) is equipped with a liftable part of 16 cm to avoid potential overruns of the surrounds.
On request, we have a wide range of customization according to your choices.
There is a possible tolerance of 3% between the theoretical dimensions validated by the client through the plans and the real dimensions of the delivered product. The seller and its customer must take into consideration this note and provide the necessary tolerances for the placement of the enclosure without difficulties.
The swimming pool enclosure proposed here is equipped with a light structure in aluminium responding at the French standard NF P90-309, is able to withstand a load of snow equal to or less than 45kg / m2. In case of snow, it is important to clear snow from the enclosure in order to avoid the risk of irreversible deformation.
The system of sliding modules on wheels cannot be referred as an airtight building, in terms of the roofing, the doors, the openings, the glass surfaces, between the sliding elements and other bonding systems.
The end customer will ensure that the support (ground) of the swimming pool enclosure is provided with a stub of concrete of at least 15cm thickness at the level of its track.
To avoid the infiltration of rainwater through the ground, the end customer will ensure to provide a slope of its tiles which starts in its highest point inside toward the outside of the enclosure . In general, a slope of 1% is considered as reasonable.